The name CROSSNROLL is composed in part from the word CROSS, which describes that the hand runs on a cross-shaped minute-track. The tip of the minute hand is mounted on a slide, which rolls back and forth on the hand platform, hence the word ROLL in the name of the watch.
28 rubies and 18 precision ball bearings are integrated in the NORD Zeitmaschine CROSSNROLL movement, of which 14 ball bearings are mounted in the hand assembly alone. Others are found on the winding rotor and the hour indicator.
MINUTE HAND ASSEMBLY :
The complicated hand assembly is constructed such that the centre of gravity is always located precisely over the central pivot point, regardless of the position of the group. To achieve this, alongside numerous other parts, 2 counterweights are mounted on the lower end of the hand assembly, which always move in the opposite direction to the extending and retracting (ROLL-ing) pointer tip. These 2 opposing counterweights are connected with the pointer tip by a connecting rod system. In addition to the centre of gravity of the complete hand assembly always lying over the central pivot point, the mechanism is designed and constructed such that the gravitational forces that act on the pointer slide with pointer tip and counterweights always counteract each other. In a level position, no gravitational forces act on the pointer slide with pointer tip and the two counterweights. However, gravitational forces act on the pointer slide with pointer tip and counterweights in all other possible watch positions. At all times and in every possible position of the hand assembly, the acting forces mutually counteract each other.
DIFFERENT MATERIALS :
In order to achieve, to have the centre of gravity always located precisely over the central pivot point of the minute-hand assembly, it was necessary to work with a number of different materials such as steel, brass, aluminium, titanium, platinum etc. and their varying densities. Many individual parts of the hand assembly consist of very light materials such as aluminium and titanium. However, in order to achieve the centre of gravity always lying directly above the central pivot point, it was also necessary to use one of the heaviest metals. As such, a balancing weight produced from solid platinum (density 20.7) is mounted on the platform in the front area beneath the pointer tip. This solid platinum weight balances out the somewhat larger and heavier structure at the lower end of the hand assembly.
HOUR INDICATOR :
The hour indicator disc is mounted on a swivel arm, which in turn is connected with the central mounting cross by ball bearings. The entire hour indicator mechanism is mounted over the hand assembly. The swivel arm on which the hour indicator disc is mounted has no mechanical drive and only starts moving due to gravitation, effected through a change in the position of the wrist on which the watch is fastened. The hour disc itself is driven via mechanically driven cogs, independent of the swivel arm. This hour indicator, for which a patent is pending (N° EP18405009.4 and CH252/18) , facilitates the hour indicator disc being in any geographically undefined position over the dial, as a result of the movement of the wrist on which the watch is fastened, and the resultant gravitation. Irrespective of the position of the swivel arm with hour indicator, the red arrow on the hour indicator always points to the correct hour of the day, aligned with the longitudinal axis of the watch case
NORD N5 , 28 ruby jewels and 18 integrated precision micro ball bearings.
Minutes: by a complicated hand assembly where 14 ball bearings are mounted in and which runs on a cross-shaped minute-track.
Hours: via a swivel arm on which the hour indicator disc is mounted. The swivel arm has no mechanical drive and only starts moving due to gravitation, effected through a change in the position of the wrist on which the watch is fastened. The hour disc itself is driven via mechanically driven cogs, independent of the swivel arm.
Automatic winding , driven by a symmetrical 360° rotor / 28800 vibrations per hour / power reserve to 38 h
Version V1 : „Grey / White / Yellow“
Version V2 : „Grey / White / Blue“
V1 limited to 97 pieces, from N° 01 to N° 97
V2 limited to 97 pieces, from N° 01 to N° 97
Stainless steel / bezel and sapphire crystal back, secured with 8 screws.
Crown with double o-ring seals.
Diameter 44,7 mm / height 15,8 mm (17,2 over the domed glass) / weight 110 grams (without strap)
Top : sapphire crystaL double- curved / both sides anti reflected
Bottom : sapphire crystal flat
Calf leather strap, with croco-texture, wide 24 mm
Setting the time. Setting starts at 5 hours 45 minutes ,and time is set to 9 hours 13 minutes.
The red arrow on the small rotating disc shows the hours. And the tip of the minute hand which rolls back and forth shows the minutes.
The red arrow on the hour indicator always points to the correct hour of the day, aligned with the longitudinal axis of the watch case.