en  de                 


The minute hand of the Model Quickindicator makes 3 rotations per hour and travels in 60 minutes over a minute track of 205mm
length, means the hand (top) travels with a speed of 205mm/hour. Because of this, Quickindicator is the name of the watch.

The  Quickindicator has possibly the fastest minute hand in any mechanical wristwatch.
Travelling on three overlapping ovoid-minute tracks, the minute hand has two axes of rotation, one of the hand itself, and the other
the rotating platform the hand is mounted on

NORD N3,   Minutes  / hours decentralized / date  / 25 jewels and integrated precision-microballbearings  /   symmetrical 360 winding rotor with integrated winding weights, which are not visible by looking trough the bottom  /   28800 vibrations per hour /  power reserve to 42 h  /  basic ETA 2824

CASE stainless steel  /  bezel and sapphire crystal back secured with 10 screws  / crown with double o-ring seals 

DIMENSIONS  diameter  :  44.3 mm  /  height :  14.4mm  (15,4  over the domed glass)  /  weight :  115 grams   (without strap)

GLASSES top:         sapphire crystal curved-flat   1.6mm to 2,7mm  both sides antireflected, laser engraved numbers
                               (inner side of the glass)
                 bottom :  sapphire crystal flat 1.8mm

WATER-RESISTANT  10 ATM (100 meters)                        STRAP  calf leather strap wide 24mm

V1   mechanical parts coated :  white rhodium / blackgold,  hand and arrows blue
V2   mechanical parts coated :  blackgold / white rhodium,  hand  blue
V3   mechanical parts coated :  blackgold / yellowgold,  hand and arrows white rhodium
V4   mechanical parts coated :  blackgold / black DLC  hand and arrows rosegold  /  Case black DLC
V1  limited to 97 pieces,  from  N 01  to  N 97
V2  limited to 97 piece
s,  from  N 01  to  N 97
V3  limited to 97 pieces,  from  N 01  to  N 97
V4  limited to 97 pieces,  from  N 01  to  N 97

Description : hand movement assembly group:

Because of the relatively high weight, the entire construction must be balanced. The hand itself has its center of gravity on its rotating axis. The completely installed hand assembly group in turn has its center of gravity precisely above the center of the movement, regardless in which position the hand assembly group is positioned.

The complete hand movement assembly group is comprised of:

Handplatform, hand, gear wheels, ball bearings, shaft, coupling and screws. The hand movement assembly group has a total weight of 0.74 grams, which compared to a standard minute hand
0.02 gram) is 37 times heavier. The "QUICKINDICATOR" hand assembly group is connected to the movement through a frame with a precision-ceramicballbearing.
Page: 1  2